How Does a Beer Keg Tap Work?
We can always find beer kegs during parties or picnics with our family and friends. Thirsty people need to drink a lot so the keg is really cost effective and could save money. A keg tap is a device that allows you to release the beer into your drinking cup from the keg. Keg taps are really easy to use but care must be given in handling it so that you don’t waste the beer, which can happen if you do not know how to use it correctly. Foam can be released from the keg tap if not done properly, and it can go all over your face or your body. It is not as easy as you see people doing it.
In order to get beer from the keg, you need to control the keg tap. You can release beer from the keg tap with the use of a lever and through pulling and pressing it. When pressure is released, it pushes the beer up and into the glass. Technically, a keg tap is a switch that you can turn of or off or you can switch to open or close.
You can minimize the foam created when pouring by placing the beer keg in a steady position for a short while. Foam build up is the result of too much movement when the keg is being transported. Let it stay for a while and place the keg where you plan to serve the beer to minimize the foam. You should remove the cap or seal since it is harder to tap with it. Pros don’t remove the cap or seal because they know how not to put the beer at risk. You need to play it safe.
Tapping with CO2 is done with portable keg systems. The keg receives pressure in a single unit pump and tap combination and this is called party pump. IN this type, the keg and the beer keg tap are separated. You need to attach the pump, and the faucet must be opened to release the pressure in the keg. Pumping gives air pressure into the keg, and a push on the lever, which is the tap handle that releases beer.
A portable beer keg or a pony keg should be finished in a single because after that the beer loses its flavor when it is mixed with air. In a traditional keg and on and off valve is used. By using this, you are serving by gravity, and there is no air pressure needed. In this type, you can get your beer by sampling opening or closing the keg when the valve is used.
Suggested Post: click